Skip to content
Telecaster Guitars
Telecaster Guitars
  • Home
  • Telecaster guitars – history
Telecaster Guitars

Description for Telecaster HH Red Black 4-Way Coil Split Marilyn Manson Tribute

Admin, September 16, 2025
https://www.youtube.com/watch?v=x6DKQp7ibFI&showinfo=0&rel=0

Website: https://wernerguitars.com/
Reverb: https://reverb.com/shop/werner-guitars
Ebay: https://www.ebay.com/usr/wernerguitars
Sweetwater: https://www.sweetwater.com/used/storefront/Werner-Guitars?radius=all
Facebook: https://www.facebook.com/profile.php?id=61571492697982

Correction to the video: The body is maple.

General Overview:

Maple body with black gloss finish
Flamed Maple Neck with 22 Stainless-Steel Frets and Gloss Transparent Red Finish
Additional position for both pickups in series (Maximum pickup output)
Humbuckers individually (partial) split
Broad-Spectrum Wiring. Full explanation of the wide range of tones is given below
Dual rail humbucking pickups (Ceramic bridge, Alnico 5 neck)
Pure Tone Nickel Mono output Jack with multi-contact dual tension grounds & dual positive tips for optimal signal, tone & lowest possible noise.
All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.
Full level, crown, polish and full set-up by a certified luthier
Strings: D’Addario Nickel Wound XL 10-46
Weight of the guitar is 7 pounds

Switching Positions as Follows:

1. Bridge (Resistance 15.0 ohms)
2. Bridge in parallel with Neck (regular Tele position) (Resistance 4.9 ohms)
3. Neck (Resistance 7.1 ohms)
4. Neck in series with Bridge (Resistance 21.6 ohms)

Body:

Maple body with black gloss finish
Marilyn Manson Sticker-bomb Treatment
Body is slightly larger (wider) than typical Telecaster size. It will fit in a general electric guitar case. However, it will not fit form-fitting Telecaster cases.

Neck:

Maple, “C” Shape neck 22 stainless steel medium/jumbo frets with rounded ends, gloss transparent red finish. 9.5″ radius
Scale length 25.5″

Hardware:

Red Modern Bridge with 6 individual roller saddles
Black Knobs and Black switch tip
Red output jack plate
Black strap pin buttons
Black Saphue Locking tuners
Red neck plate
Red all-in-one string ferrule
Black roller string trees

Electronics:

Black Dual Rail Ceramic Bridge Pickup 12k (Exact measure 11.9 ohms).
Black Alnico 5 Dual Rail Neck Pickup 8k (Exact measure 7.5 ohms).
500K Push/Push Alpha Volume/Tone Potentiometer Audio Taper
Oak Grigsby 4-Way Blade Switch
0.022uF Polyester Film Tone Capacitor
Pure Tone Nickel Mono output Jack with multi-contact dual tension grounds & dual positive tips for optimal signal, tone & lowest possible noise.
All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.

Full-spectrum Resistance 19 ohms to 3 ohms: Guitar has nine (9) distinct resistance settings with mix and match of push-push coil splits. Positions and resistance values are charted below at the very bottom. High-output position number 4 with bridge and neck wired in series. Coil splits are “partial” coil splits modeled after PRS “partial” coil splits to retain oomph, output, and tone. Capable of chicken-pickin’ country, jazz, smooth blues, roaring rock, to stoner doom metal, the sonic possibilities are endless.

You have OPTIONS. Just message before the sale if you want anything changed about the guitar. (Pickups, hardware, new wiring/signal chain, etc.) You will be notified if the change can be made, time to complete, cost if any, and pictures provided as appropriate. Get the guitar YOU want. Message today!

Switching Positions as Follows:

1. Bridge (Resistance 11.9 ohms)

with (partial) coil split (tone knob only) 7.6 ohms
with (partial) coil split (tone & volume knob) 3.4 ohms
with (partial) coil split (volume knob only) 4.0 ohms
2. Bridge in parallel with Neck (regular Tele position) (Resistance 4.7 ohms)

with (partial) coil split (tone knob only) 3.8 ohms
with (partial) coil split (tone & volume knob) 3.1 ohms
with (partial) coil split (volume knob only) 3.6 ohms
3. Neck (Resistance 7.5 ohms)

with (partial) coil split (volume knob only) 5.2 ohms
4. Neck in series with Bridge (Resistance 19.1 ohms)

with (partial) coil split (tone knob only) 14.9 ohms
with (partial) coil split (tone & volume knob) 5.6 ohms
with (partial) coil split (volume knob only) 5.7 ohms

Full range of resistance:

19.1 ohms
14.9 ohms
11.9 ohms
7.6 ohms
5.7 ohms
5.2 ohms
4.7 ohms
3.8 ohms
3.1 ohms

Telecaster Guitars '70s'80s'90s50's5960sAndrew WernerAndy WernerBlackBodybridgecapacitorclassic rockCoil splitCustomeBayelectric guitarepiphoneFull Spectrum Resistancegibsonhand builtHardwareHHhigh gainHigh OutputHot RailsHShumbuckerJim RootJohn 5Les PaulLightweightluthierneckOne of a KindPartscasterPush-Pull WiringReverbSatinSHSingle CutSolidSSstringssweetwatertelecastertoneTreble BleedtunersvintageWerner GuitarsWilkinson

Post navigation

Previous post
Next post

Leave a Reply Cancel reply

You must be logged in to post a comment.

©2026 Telecaster Guitars | WordPress Theme by SuperbThemes