Specs: Thinline Telecaster HH 2024 Transparent Black Ash Partial Coil Splits In Series Pure Tone

Reverb shop: Search: “Werner Guitars” https://reverb.com/shop/werner-guitars
Ebay shop: Search: “WernerGuitars” https://www.ebay.com/usr/wernerguitars
Sweetwater Gear Exchange: Search: “Werner Guitars” https://www.sweetwater.com/used/storefront/Werner-Guitars?radius=all

Comes with padded gigbag. All parts were bought new and put in the guitar. General specs below, and full description/specs at the bottom.:

Full-spectrum Resistance 29 ohms to 5 ohms: Guitar has nine (9) distinct resistance settings with mix and match of push-push coil splits. Positions and resistance values are charted below at the very bottom. High-output position number 4 with bridge and neck wired in series. Coil splits are “partial” coil splits modeled after PRS “partial” coil splits to retain oomph, output, and tone.

You have OPTIONS at Werner Guitars. Just message before the sale if you want anything changed about the guitar. (Pickups, hardware, new wiring/signal chain, etc.) You will be notified if the change can be made, time to complete, cost if any, and pictures provided as appropriate. Get the guitar YOU want. Message today!

Switching Positions as Follows:
1. Bridge (Resistance 12.8 ohms)
2. Bridge in parallel with Neck (regular Tele position) (Resistance 7.5 ohms)
3. Neck (Resistance 17.3 ohms)
4. Neck in series with Bridge (Resistance 29.1 ohms)

General Overview:

Transparent Black High Gloss Ash body with binding on top and back
Matte Black Neck with Matching Black Headstock
Black Dual Rail Humbucker Bridge Pickup 13k
Black 4-rail Humbucker Neck Pickup 17k
Additional position for both pickups in series (Maximum pickup output)
Humbuckers individually (partial) split
Pure Tone Black Nickel Mono output Jack with multi-contact dual tension grounds & dual positive tips for optimal signal, tone & lowest possible noise.
Strings: D’Addario Nickel Wound Strings XL 10-46 EXL110
All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.
Weight of the guitar is 7.6 pounds
Body

Transparent Black High Gloss Ash body with binding on top and back
Matching Black F-hole
Neck

Scale length 25.5″
Matte black maple neck with matching rosewood fretboard & matching black headstock. 22 medium jumbo frets. 12″ radius (1st fret 0.86″, 12th fret 0.96″)
Hardware

Black Wilkinson Bridge with upgraded brass, threaded, compensated saddles and option for top-load
Black control plate with ergonomic slanted switch positioning
Black knobs and Black switch tip
Black output jack plate
Black strap pin buttons
Black Wilkinson tuners
Black neck plate
Black all-in-one string ferrule
Black easy-glide string trees
Electronics

Black Dual Rail Humbucker Bridge Pickup 13k (Exact measure 12.8 ohms).
Black 4-rail Humbucker Neck Pickup 17k (Exact measure 17.3 ohms).
500K Volume/Tone Potentiometer Push/Push Audio Taper
Oak Grigsby 4-Way Blade Switch
.022uf 400v 5% Tolerance Polyester Radial Guitar Tone Capacitor ECQ-E
Additional position for both pickups in series (Maximum pickup output)
Humbuckers individually (partial) split
Pure Tone Black Nickel Mono output Jack with multi-contact dual tension grounds & dual positive tips for optimal signal, tone & lowest possible noise.
All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.

Detailed Switching Positions as Follows:

1. Bridge (Resistance 12.8 ohms)

with (partial) coil split (tone knob only) 8.1 ohms

with (partial) coil split (tone & volume knob) 4.8 ohms

with (partial) coil split (volume knob only) 6.1 ohms

2. Bridge in parallel with Neck (regular Tele position ) (Resistance 7.5 ohms)

with (partial) coil split (tone knob only) 5.6 ohms

with (partial) coil split (tone & volume knob) 4.6 ohms

with (partial) coil split (volume knob only) 5.8 ohms

3. Neck (Resistance 17.3 ohms)

with (partial) coil split (volume knob only) 10.5 ohms

4. Neck in series with Bridge (Resistance 29.1 ohms)
with (partial) coil split (tone knob only) 24.7 ohms

with (partial) coil split (tone & volume knob) 10.6 ohms

with (partial) coil split (volume knob only) 10.6 ohms

Full range of resistance:

29.1 ohms

24.7 ohms

17.3 ohms

12.8 ohms

10.6 ohms

8.1 ohms

7.5 ohms

5.8 ohms

4.6 ohms